Most Popular Pro Crosshairs
The crosshair is the single most personal setting in CS2. Professional players spend hundreds of hours refining their crosshair to match their playstyle -- some prefer small, static dots for precision rifle play while others use dynamic crosshairs with gaps for spray feedback. Below are the crosshair codes used by ten of the most prominent CS2 professionals. You can copy any code and paste it directly into your CS2 console or crosshair settings menu.
| Player | Crosshair Code | Style Description |
|---|---|---|
| s1mple | CSGO-aN4Fc-Oj4YH-YjMZK-ZdQz4-GvoQD | Small static crosshair, green, size 2, thickness 0, gap -3, no dot |
| ZywOo | CSGO-Vyxwv-KFcnP-cDYRx-F3hJv-vYzKG | Classic static, cyan, size 2, thickness 0, gap -2, no outline |
| NiKo | CSGO-Nk3K5-Y8YUK-bYQSX-FjGdP-fmbOL | Small green crosshair, size 1.5, thickness 0, gap -3, static |
| donk | CSGO-5N3VU-Qx2GF-OJ3AC-4VhWx-7E5oN | Small static, green, size 2, thickness 0, gap -2, no dot |
| m0NESY | CSGO-3bfmC-acm8H-K87vk-SQaPF-FkszM | Static, green, size 1, thickness 0, gap -3, outline enabled |
| ropz | CSGO-R4bMG-5Z2JG-FT7pb-H5LJn-YvhKP | Minimal static, green, size 1.5, thickness 0.5, gap -3, no dot |
| b1t | CSGO-UL3xN-GVSZP-V7K4F-9Mz2B-YhPAR | Static, green, size 2, thickness 0, gap -1, clean minimal style |
| device | CSGO-O4Zy6-FfkYa-7GWRN-C4Avz-EXdbL | Classic static, green, size 1.5, thickness 1, gap -2.5, no dot |
| electronic | CSGO-c3KMb-GxP8Z-2hRQH-VqFp5-NY72J | Static, green, size 2.5, thickness 0, gap -2, visible at distance |
| broky | CSGO-8qpDR-Yz5JA-FVwnT-73fKD-MKWGL | Thin static, green, size 2, thickness 0.5, gap -1.5, AWP-friendly |
Note: Crosshair codes can be applied in CS2 via Settings > Game > Crosshair > Share or Import. Paste the code and click Apply. Pro players occasionally update their crosshairs between tournaments, so these represent the most recently documented configurations.
Sensitivity & DPI Settings
Mouse sensitivity is the foundation of aiming in CS2. Professional players overwhelmingly prefer low sensitivity settings, with the average eDPI (DPI multiplied by in-game sensitivity) falling between 700 and 900. Low eDPI allows for precise micro-adjustments when holding angles, while still permitting 180-degree turns with a full mousepad swipe. The table below shows the documented settings used by top professionals.
| Player | DPI | In-Game Sens | eDPI | Zoom Sens |
|---|---|---|---|---|
| s1mple | 400 | 3.09 | 1236 | 1.00 |
| ZywOo | 400 | 2.00 | 800 | 1.00 |
| NiKo | 400 | 1.55 | 620 | 1.00 |
| donk | 400 | 1.80 | 720 | 1.00 |
| m0NESY | 400 | 1.55 | 620 | 0.90 |
| ropz | 400 | 1.77 | 708 | 1.00 |
| b1t | 400 | 1.50 | 600 | 1.00 |
| device | 400 | 1.90 | 760 | 1.00 |
| electronic | 400 | 2.20 | 880 | 1.00 |
| broky | 800 | 0.85 | 680 | 0.90 |
The overwhelming majority of CS2 professionals play at 400 DPI. This is partly historical convention from the CS 1.6 era, but also because 400 DPI provides consistent pixel-level tracking on most modern sensors. A few players like broky use 800 DPI with a proportionally lower in-game sensitivity to achieve the same eDPI. The end result is identical -- what matters is the eDPI value, not the individual DPI or sensitivity numbers.
Resolution & Video Settings
Resolution choice in CS2 is one of the most debated topics in competitive play. Many professionals still use 4:3 stretched resolutions despite having access to modern 16:9 monitors. Stretched 4:3 makes player models appear wider and can create a perceived speed advantage for tracking targets, though it reduces the field of view. Others play at native 16:9 for the wider viewing angle. Below are the documented resolution settings.
| Player | Resolution | Aspect Ratio | Display Mode |
|---|---|---|---|
| s1mple | 1280×960 | 4:3 | Stretched |
| ZywOo | 1280×960 | 4:3 | Stretched |
| NiKo | 1280×960 | 4:3 | Stretched |
| donk | 1920×1080 | 16:9 | Native |
| m0NESY | 1280×960 | 4:3 | Stretched |
| ropz | 1920×1080 | 16:9 | Native |
| b1t | 1280×960 | 4:3 | Stretched |
| device | 1280×960 | 4:3 | Stretched |
| electronic | 1280×960 | 4:3 | Stretched |
| broky | 1024×768 | 4:3 | Stretched |
The split between 4:3 stretched and 16:9 native is roughly 70/30 among the professional player base. Notable native resolution advocates include donk and ropz, both of whom prioritize the wider field of view. Most professionals play at 240Hz or 360Hz refresh rates regardless of resolution, as higher frame rates reduce input latency and improve motion clarity during fast-paced engagements.
How to Copy Pro Settings
Applying a professional player's settings to your own CS2 client is straightforward, but there are a few important steps to follow for the best results.
- Copy the crosshair code from the table above. Open CS2, navigate to Settings > Game > Crosshair, click the share/import icon and paste the code. Click Apply to activate the crosshair instantly.
- Set your mouse DPI using your mouse software (Logitech G Hub, Razer Synapse, SteelSeries Engine, etc.). Most pros use 400 DPI. If your mouse does not support exactly 400, use 800 and halve the in-game sensitivity.
- Set in-game sensitivity via Settings > Keyboard/Mouse > Mouse Sensitivity. Enter the exact value from the table. Ensure mouse acceleration is disabled (raw input enabled) so your aim is consistent regardless of mouse speed.
- Set your resolution via Settings > Video > Resolution. If you want 4:3 stretched, you may need to configure your GPU control panel (NVIDIA Control Panel or AMD Radeon Settings) to set the scaling mode to "Full Screen" rather than "Aspect Ratio" to achieve the stretched effect.
- Give yourself adjustment time. Pro settings are optimized for players with thousands of hours of muscle memory. If you switch from high sensitivity to low sensitivity, expect 1-2 weeks of adjustment before your aim feels natural at the new setting. Practice in deathmatch or aim training maps during this period.
For more player-specific data, visit our player profiles and team pages for in-depth CS2 statistics.
CS2 Pro Settings FAQ
How do I import a crosshair code in CS2?
Open CS2 and go to Settings > Game > Crosshair. Click the share/import button (it looks like a share icon). Paste the crosshair code string (starting with CSGO-) into the input field and click Apply. Your crosshair will update immediately. You can also enter crosshair commands directly into the developer console if you prefer manual configuration -- use commands like cl_crosshairsize, cl_crosshairgap, cl_crosshairthickness and cl_crosshaircolor to set individual parameters.
What sensitivity do most CS2 pros use?
The average eDPI among CS2 professionals falls between 700 and 900. Most play at 400 DPI with an in-game sensitivity between 1.5 and 2.5. This translates to approximately 40-55 centimeters of mouse movement for a full 360-degree turn. Lower sensitivity allows for more precise aim adjustments, which is critical at the professional level where pixel-perfect accuracy determines round outcomes. Very few professionals use an eDPI above 1200, and almost none exceed 1500.
Should I use 4:3 stretched or 16:9 native in CS2?
Both options are competitively viable. Approximately 70% of CS2 professionals use 4:3 stretched (typically 1280x960), which makes player models appear wider and can make targets feel easier to track at close to medium range. The trade-off is a reduced horizontal field of view, meaning you see less of the map on screen. The remaining 30% use 16:9 native (1920x1080), which provides the widest field of view and sharpest image quality. Neither choice provides an objective competitive advantage -- it comes down to personal preference and what feels most comfortable for your playstyle.
Where are CS2 config files stored?
CS2 stores configuration files in your Steam userdata folder. The typical path on Windows is C:\Program Files (x86)\Steam\userdata\[YOUR_STEAM_ID]\730\local\cfg\. The main config file is cs2_user_keys_0_slot0.vcfg which contains your keybinds and settings. Unlike CS:GO, CS2 uses a different config format (KeyValues3/VDF) and does not support the traditional autoexec.cfg in the same way. To create custom configs, you can place commands in an autoexec.cfg file inside the game\csgo\cfg\ folder within your CS2 installation directory and add +exec autoexec.cfg to your Steam launch options.
Does copying pro settings make you better at CS2?
Copying pro settings provides a reasonable starting point but will not automatically improve your aim or game sense. Professional players have developed their settings over thousands of hours of practice, and their muscle memory is tuned specifically to those values. The most important takeaway from pro settings is the general range of values -- if most professionals use an eDPI between 600 and 900, you should probably stay within that range rather than playing at 3000 eDPI. Beyond that baseline, the best sensitivity is the one you practice with consistently. Changing settings frequently is far more harmful than using a slightly sub-optimal value consistently.
Deprecated: preg_replace(): Passing null to parameter #3 ($subject) of type array|string is deprecated in /home/cs2bet/htdocs/www.cs2bet.io/wp-includes/class-wpdb.php on line 3801
